Manways:
Manufactured from heavy fiberglass reinforced polyester. They protect and provide access to the air compressors, electrical junction boxes and the mechanical connections. Inside the manway, energy efficient ring type air compressors are mounted. The level sensors and submersible pump are also wired to the junction box.
Air compressor(s):
Regenerating energy efficient ring type supplying up to 52 cubic feet of air per minute to the diffusers operating on 230 volts, 60 Hz. variable hp./ amps depending on load required results.
Control panel:
The panel box is both UL and CSA approved type 3 enclosure suitable for outdoor / indoor mounting. It contains contactors, motor starters, program timer, control relays, alarm buzzer, and junction block. A separate circuit breaker load center panel is mounted onto the bottom of the Aquarobic control panel. The load center panel is UL listed with a main ratings 120 / 240 / Volts AC. 3-wire 125 Amp. With 8 poles, normally with a 20 amp double breaker 240 volts for the blower and pump power, a 15 amp single phase breaker 115 volts for the control circuit and another 15 amp single phase breaker 115 volts for the alarm circuit.
A 230-volts single-phase supply line (3 wires with ground # 10 gage.) from the main power source. A control panel schematic guides the qualified serviceman or electrician to troubleshoot any part of the system. A visual, audible, and remote signal are provided to monitor and ensure continuous proper operation.
