AquaO2
About AquaO2 Products Services Related Links Contact
The AquaO2 Maxi Plant
View The Aquarobic Mini-Plant
About Process Components Add on Components Denitrification  Testing/Maintenance

AquaO2 Maxi-Plant Add On Components

Up-Flow Filter

The clear supernatant which was transferred out of the clarifier chamber by transfer pump # 2 is pumped down to a perforated manifold at the base of the up-flow or recirculating filter chamber where the effluent rises slowly upward through the filter media. At the top of the filter the polished clear liquor then overflows by gravity through a Chlorinator to the last chamber where the effluent can be used for toilet flushing, lawn watering and other non-potable uses.

At the end of the filter cycle, the remaining fluid in the up-flow filter is returned to the front aeration chamber by the backwash pump # 4 which is located in a perforated well tile in the center of the filter chamber. The rapid return rate flushes back accumulated solids from the filter and as the liquid is removed, air re-enters around the filter media thus maintaining a healthy aerobic biomass to reduce the pollution load from incoming batches.



 

Wastewater Treatment Systems
The Aquarobic Mini-Plant
The Mini-Plant series (Sequencing Batch Reactor-SBR) treats wastewater flows from 500 to 5,000 gallons per day.
More Information On The Aquarobic Mini-Plant
The Aqua O2 Maxi-Plant
The Maxi-Plant series (Sequencing Batch Reactor-SBR) treats wastewater flows from 5000 to 100,000 gal per day.
More Information On The Aqua O2 Maxi-Plant

About AquaO2  |  Products  |  Services  |  Related Links  |  Contact Us  |  Home

AquaO2 Wastewater Treatment Systems, Inc.  |  5800 Prillaman Switch Rd.  |  PO Box 579  |  Ferrum, Virginia 24088
Ph: Sales (800) 927-8304  |  Office: (540) 365-0154  |  Fax: (540) 365-0155  |  info@aqua-o2.com  |  Copyright © 2024, All Rights Reserved